Reviewed by
Jarrett Dottin
Licensed Occupational Therapist dedicated to helping others live their best lives. Certified lymphedema therapist and amazon affiliate who has tested over 1,000 different products. http://About%20JD →
As an Amazon Associate I earn from qualifying purchases. Some links on this site are affiliate links, if you buy though them I may make a commission at no extra cost to you.
Quick Verdict
Twelve pine green felt tiles, 70 adhesive tabs, and a wall that finally holds my kid’s drawings without a single thumbtack hole. The Fluxynara large felt kit lets you build any shape you want up to 48″ x 36″, and the 9mm thickness actually takes a pin instead of shrugging it off. It reads more like decor than a cork board, which is the whole point.
Clicking takes you to the seller's website. We may earn a small commission if you purchase, at no extra cost to you.
The Wall’s Large Felt Impact Finally Arrives
My kids generate artwork faster than my fridge can hold it. That’s the problem this large felt bulletin board kit is built to solve. Instead of one boxy cork square, you get 12 individual felt tiles you arrange however your wall allows, which is exactly why I set it up as a rotating display for kids’ art in one room and a note-and-schedule board in my office.
The pine green color is the part I keep coming back to. It doesn’t look like office supply. It looks like something you’d pick on purpose. And because each tile is its own piece, the layout is yours to design instead of the manufacturer’s.
What’s In The Box, Tile By Tile
Twelve tiles, each 11.8″ square, 9mm thick, 150g apiece. Do the math and a full grid covers 48″ x 36″. The kit ships with 70 removable adhesive tabs, so mounting doesn’t touch a drill.
| Spec | Detail |
|---|---|
| Tiles included | 12 pieces |
| Tile size | 11.8″ x 11.8″ (30cm) |
| Full grid coverage | 48″ x 36″ |
| Thickness / weight | 0.35″ (9mm) / 150g each |
| Material | Dense polyester felt |
| Mounting | 70 removable adhesive tabs |
| Sound rating | NRC up to 0.95 |
How The Felt Holds Up In Daily Use
The 9mm thickness is what separates this from the flimsy felt sheets you find in a craft aisle. A pin sinks in and stays put instead of poking through to the wall, and the tiles don’t sag or curl at the corners once they’re up. That density is doing double duty too. Felt this thick is why the listing claims an NRC rating up to 0.95, and a room lined with soft panels does take the sharp echo off. I wouldn’t call it a soundproofing project, but a busy office or a classroom corner feels calmer with fabric on the wall instead of bare drywall.
The modular layout is the sleeper feature. You can run a tight 4×3 grid, stagger them, leave gaps, or spell out a shape. For a kids’ art wall I liked spacing them with small gaps so each drawing gets its own little frame of green behind it.
The Adhesive Tabs Are The Part To Slow Down On
Those 70 tabs only work as well as the surface you stick them to. On smooth painted drywall or a clean door they grip fine and peel off later without leaving marks. On textured or freshly painted walls, adhesive is always a gamble, and heavy felt tiles are not the thing you want testing gravity over your desk. Press each tab firmly and give it time to set before you load the tiles with photos and clips. That’s the one step it’s easy to rush, and it’s the step that decides whether the whole board stays flat against the wall.
Get it now
Fluxynara Large Felt Bulletin Board
Get the best price on Amazon →As an Amazon Associate I earn from qualifying purchases. Some links on this site are affiliate links, if you buy though them I may make a commission at no extra cost to you.
Who Actually Gets The Most Out Of This
The two use cases that clicked hardest for me: a kids’ art wall where you’re rotating drawings weekly and hate the look of a corkboard, and a home office where you want a note wall that absorbs some of the room’s hard echo at the same time. Dorm and rental tenants get a third win, no screws, no holes, no deposit fight. If your wall is textured or you just need a quick single panel, this isn’t your tool.
Felt Tiles vs A Standard Cork Board
Cork’s real advantage is a five-minute install: two screws, done. These felt tiles ask more of you upfront, floor layout, tab placement, cure time. What you get back is a board that absorbs echo at up to NRC 0.95 (cork does essentially nothing acoustically), a modular shape that fits an awkward wall instead of fighting it, and a color that reads as intentional rather than inherited from a supply closet. If speed is the priority, buy cork. If the wall matters, buy felt.
My Advice Before You Hang It
Lay all 12 tiles on the floor and photograph the arrangement before you touch a single tab, once a tab bonds to painted drywall and you peel it to reposition, that tab is done. Wipe the wall with a dry cloth first; any dust or grease and the hold is compromised from the start. Each tile is only 150g, but stack three heavy clipboards on one and you’re asking the tabs to do more than they’re rated for. Get those two steps right and the install genuinely takes under an hour.
Pros
- 12 modular tiles let you build any shape up to 48″ x 36″
- Thick 9mm felt takes pins without poking through or sagging
- Pine green looks like intentional decor, not office supply
- 70 adhesive tabs mean no drill and no wall holes
- Dense felt cuts room echo, with an NRC rated up to 0.95
Cons
- Adhesive tabs only hold well on smooth, clean surfaces
- Heavy tiles need the tabs pressed firmly and given time to set
- More setup than a single hang-and-go cork board
Frequently Asked Questions
What surfaces do the adhesive tabs work on?
The 70 tabs are made for smooth surfaces like painted drywall, doors, and glass. They peel off cleanly without residue, but textured or freshly painted walls aren’t a reliable hold for tiles this heavy.
Can I make the board smaller than 48 by 36 inches?
Yes. Because it’s 12 separate tiles, you can use as few or as many as you want. Run a 2×3 block for a small corner or the full 4×3 grid for a big statement wall.
Do the tiles really absorb sound?
They take the edge off echo. The listing rates them up to NRC 0.95, and dense felt on a wall noticeably softens harsh reflections in an office or classroom. It’s acoustic treatment, not soundproofing, so it won’t block noise from the next room.
Will pins damage the felt over time?
The 9mm density holds up well to repeated pinning. Pins self-seal into the fibers and the surface stays smooth, so you’re not left with obvious punctures like you’d get on a thin foam board.
Can I reuse the tiles if I move?
The tiles themselves are reusable, but the adhesive tabs are one-time-use. You’d need fresh tabs to remount them, so budget for a replacement set if you plan to relocate the board.
Are there other color options?
This kit is pine green, and the brand lists multiple color choices so you can mix tiles for DIY designs. Check the current listing for which colors are in stock.
Is it heavy enough to worry about it falling?
Each tile is 150g, which is manageable if the tabs are applied correctly. The risk isn’t the weight itself, it’s rushing the install. Press firmly, let the adhesive set, and don’t overload one tile.
Does it work for a classroom or dorm with no-hole rules?
Yes, that’s a strong use case. The damage-free tabs mean no screws or nails, so it suits dorms, rentals, and classrooms where you can’t put holes in the wall.
Get it now
Fluxynara Large Felt Bulletin Board
Get the best price on Amazon →As an Amazon Associate I earn from qualifying purchases. Some links on this site are affiliate links, if you buy though them I may make a commission at no extra cost to you.
About the reviewer
Jarrett Dottin
Licensed Occupational Therapist dedicated to helping others live their best lives. Certified lymphedema therapist and amazon affiliate who has tested over 1,000 different products.
