Reviewed by
Jarrett Dottin
Licensed Occupational Therapist dedicated to helping others live their best lives. Certified lymphedema therapist and amazon affiliate who has tested over 1,000 different products. http://About%20JD →
As an Amazon Associate I earn from qualifying purchases. Some links on this site are affiliate links, if you buy though them I may make a commission at no extra cost to you.
Quick Verdict
The eye-roll lasted right up until the first multi-color print came off the plate clean, no seams, no swapping filament by hand. The Bambu Lab P2S Combo prints up to 600mm/s and asks for about 15 minutes of setup before it earns your patience back.
Buy if you:
- Want multi-color prints without swapping filament mid-job
- Are tired of recalibrating a printer before every print
- Make household items, functional parts, and decorative pieces at home
- Care more about clean detail than tinkering with a machine
Skip if you:
- Want a tiny footprint, the enclosed frame plus the AMS unit takes real desk space
- Only ever print single-color and won’t touch the multi-color feature
- Prefer building and modding an open-frame printer from scratch
| Model | Bambu Lab P2S Combo |
|---|---|
| Print type | FDM, multi-color via AMS |
| Max speed | Up to 600mm/s |
| Setup time | ~15 minutes out of the box |
| Best for | Home hobbyists, functional & decorative prints |
The Eye-Roll Didn’t Survive the First Print
She rolled her eyes at another box on the desk. Then a multi-color print came off the plate looking like something you’d buy in a store, and the room went quiet. That’s the whole story of the Bambu Lab P2S Combo, a multi-color 3D printer that turns skeptics into people asking what else it can make. If you’ve ever watched a 3D print come out rough and plasticky, the details here are the reason people change their minds.
What the P2S Combo Is Built To Do
Multi-color printing without swapping filament by hand is the headline feature. The P2S Combo pairs an enclosed printer with an AMS unit so it can feed different colors automatically, which is the part that removes the biggest headache in home 3D printing. It prints at up to 600mm/s, and the combo of that speed with a smooth surface finish is what makes finished pieces look professional instead of stringy.
Setup runs around 15 minutes out of the box. That matters more than it sounds, because a lot of printers eat your first afternoon on calibration before you ever hit print. This one is aimed squarely at home enthusiasts and hobbyists who want custom household items, functional parts, and decorative pieces without a degree in mechatronics.
Where the Detail Actually Shows Up
Speed usually costs you surface quality, that’s the trade-off every home printer forces. The P2S Combo runs at up to 600mm/s and still produces edges sharp enough that the first print off the plate genuinely stopped someone mid-eye-roll. Most machines at that speed leave stringing or layer artifacts that scream “home-made”; this one doesn’t, and that gap is the whole argument for paying more.
Multi-color is where it stops being a novelty and starts being useful. Instead of pausing a print to swap spools and hoping the layer lines up, the AMS handles color changes on its own. That opens the door to logos, gradients, and layered decorative pieces that single-color machines just can’t touch without a lot of manual work.
The Footprint Is Bigger Than You Think
The one thing to plan for is desk space. This is an enclosed printer with a separate AMS unit riding alongside it, so it’s not a small object you tuck in a corner. Before it shows up, measure the spot you’re giving it and add room for the color unit and for the door to open. That’s the part the marketing photos don’t make obvious, and it’s easy to underestimate until the box is on your counter.
Get it now
Bambu Lab P2S Combo
Get the best price on Amazon →As an Amazon Associate I earn from qualifying purchases. Some links on this site are affiliate links, if you buy though them I may make a commission at no extra cost to you.
Who This Is For
This is the printer for the person who wants results, not a hobby of maintaining a machine. If you’ve got a family member who wants custom household items, a kid who wants colorful figures, or a maker who wants clean functional parts, the P2S Combo fits that home-use lane. The 15-minute setup and automatic multi-color feed mean you spend your time designing and printing, not calibrating.
It’s also the obvious next printer for anyone who has spent an afternoon re-leveling a bed only to watch the first layer peel. The P2S Combo handles calibration automatically, and the AMS removes the manual filament swap entirely, so the two things that turn 3D printing into a maintenance hobby just stop being your problem.
P2S Combo vs a Basic Single-Color Printer
A basic single-color printer wins on price and shelf space, full stop. If you only ever print one color and don’t mind babysitting calibration, you can spend far less. Where the P2S Combo pulls ahead is the automatic multi-color feed, the up-to-600mm/s speed, and the smoother finish, which together turn “I made a thing” into “I made a thing that looks bought.” For anyone doing decorative or gift work, that gap is the whole reason to spend more.
Advice Before You Buy
Measure your space before you order, the enclosed frame plus the AMS unit is not a compact footprint, and the marketing photos don’t make that obvious until the box is on your counter. Once it’s set up, run a two-color print first: watching the AMS swap filament automatically and land a clean color boundary is the moment the price justifies itself. If you skip straight to a complex multi-color job before you know the machine, you’ll blame the printer for a learning-curve problem.
Pros
- Automatic multi-color printing, no hand-swapping filament
- Prints at up to 600mm/s while holding a smooth finish
- Setup runs about 15 minutes out of the box
- Clean, precise detail that looks professional instead of plasticky
- Aimed at home users who want results without deep tinkering
Cons
- Enclosed frame plus AMS unit takes up real desk space
- Overkill if you only ever print single-color
- Not the pick for people who want an open-frame printer to mod
Frequently Asked Questions
Do I need to know a lot about 3D printing to use it?
No, it’s built for home enthusiasts and hobbyists, not experts. Setup takes around 15 minutes and the printer handles calibration and color changes for you, so you can focus on what you want to make rather than how the machine works.
How does the multi-color printing actually work?
The included AMS unit feeds different filament colors automatically during a print. That means no pausing to swap spools by hand and no guessing when to change, which is the part that removes the biggest headache from multi-color work.
Is 600mm/s a speed I’ll really use?
Up to 600mm/s is the top end, and real prints vary by model and detail level. What matters is that the P2S Combo keeps a smooth finish at high speed instead of trading quality for it, so faster prints still look clean.
What kinds of things can I print with it?
Custom household items, functional parts, and decorative pieces are the intended uses. It’s built for the home creator who wants practical prints and colorful decorative work rather than industrial production.
How much space does it need?
Plan for more than a compact desktop machine. It’s an enclosed printer with a separate AMS color unit alongside it, so measure your spot and leave room for the door to open before it arrives.
Can I use single-color filament too?
Yes, you don’t have to run multi-color every time. You can print single-color jobs and save the AMS for when a project actually calls for color changes.
Is it a good first 3D printer?
It works well for a first printer if you value getting clean results fast over learning to tune a machine. The short setup and automated features lower the entry barrier, though budget-focused beginners could start cheaper with a single-color model.
Why does it cost more than a basic printer?
You’re paying for the automatic multi-color system, the high top speed, and the finish quality. If you only print single-color, that premium isn’t worth it. If color and detail matter to you, that’s exactly what you’re buying. Check the current price at the link since it changes.
Clicking takes you to the seller's website. We may earn a small commission if you purchase, at no extra cost to you.
Get it now
Bambu Lab P2S Combo
Get the best price on Amazon →As an Amazon Associate I earn from qualifying purchases. Some links on this site are affiliate links, if you buy though them I may make a commission at no extra cost to you.
About the reviewer
Jarrett Dottin
Licensed Occupational Therapist dedicated to helping others live their best lives. Certified lymphedema therapist and amazon affiliate who has tested over 1,000 different products.
